Remote Access Capabilities

Radare can be run locally, or it can be started as a server process which is controlled by a local radare2 process. This is possible because everything uses radare's IO subsystem which abstracts access to system(), cmd() and all basic IO operations so to work over a network.

Help for commands useful for remote access to radare:

[0x00405a04]> =?
|Usage:  =[:!+-=hH] [...] # radare remote command execution protocol
rap commands:     
| =                  list all open connections
| =<[fd] cmd         send output of local command to remote fd
| =[fd] cmd          exec cmd at remote 'fd' (last open is default one)
| =! cmd             run command via r_io_system
| =+ [proto://]host  add host (default=rap://, tcp://, udp://)
| =-[fd]             remove all hosts or host 'fd'
| ==[fd]             open remote session with host 'fd', 'q' to quit
rap server:       
| =:port             listen on given port using rap protocol (o rap://9999)
| =:host:port cmd    run 'cmd' command on remote server
http server:
| =h port            listen for http connections (r2 -qc=H /bin/ls)
| =h-                stop background webserver
| =h*                restart current webserver
| =h& port           start http server in background)
| =H port            launch browser and listen for http
| =H& port           launch browser and listen for http in background

You can learn radare2 remote capabilities by displaying the list of supported IO plugins: radare2 -L.

A little example should make this clearer. A typical remote session might look like this:

At the remote host1:

$ radare2 rap://:1234

At the remote host2:

$ radare2 rap://:1234

At localhost:

$ radare2 -

; Add hosts

[0x004048c5]> =+ rap://<host1>:1234//bin/ls
Connected to: <host1> at port 1234
waiting... ok

[0x004048c5]> =
0 - rap://<host1>:1234//bin/ls

You can open remote files in debug mode (or using any IO plugin) specifying URI when adding hosts:

[0x004048c5]> =+ =+ rap://<host2>:1234/dbg:///bin/ls
Connected to: <host2> at port 1234
waiting... ok
0 - rap://<host1>:1234//bin/ls
1 - rap://<host2>:1234/dbg:///bin/ls

To execute commands on host1:

[0x004048c5]> =0 px
[0x004048c5]> = s 0x666

To open a session with host2:

[0x004048c5]> ==1
fd:6> pi 1
fd:6> q

To remove hosts (and close connections):

[0x004048c5]> =-

You can also redirect radare output to a TCP or UDP server (such as nc -l). First, Add the server with '=+ tcp://' or '=+ udp://', then you can redirect the output of a command to be sent to the server:

 [0x004048c5]> =+ tcp://<host>:<port>/
Connected to: <host> at port <port>
5 - tcp://<host>:<port>/
[0x004048c5]> =<5 cmd...

The =<' command will send the output from the execution ofcmd` to the remote connection number N (or the last one used if no id specified).

results matching ""

    No results matching ""